<\/p>\n
Choosing the wrong padel turf is an expensive mistake \u2014 premature fiber wear, inconsistent ball bounce, and a full surface replacement within two to three years. Choose correctly, and a well-specified padel surface will hold up under heavy daily use for eight to twelve years. This guide covers the six specifications that determine how a padel court performs on day one and how long it stays at standard.<\/p>\n
<\/p>\n
\u25bc At a Glance<\/p>\n
The pile height of padel court artificial turf typically falls between 10 mm and 15 mm, with 12 mm being the most common standard. This is significantly shorter than football turf (40\u201360 mm) because padel gameplay requires a firm, fast, and predictable surface rather than cushioned ground contact.<\/p>\n
A lower pile height \u2014 around 10 mm \u2014 produces a slower ball speed and more stable rebound, which suits beginners or players who prioritise ball control. A higher pile \u2014 around 15 mm \u2014 speeds up rolling and rebounding, creating a faster-paced experience better suited to intermediate and advanced players.<\/p>\n
For most commercial padel facilities, 12 mm is the right choice. It balances playability across all skill levels, holds sand infill well, and maintains consistent surface characteristics as the turf ages.<\/p>\n
<\/p>\n
| \u0110\u1ed1ng chi\u1ec1u cao<\/th>\n | Ball Speed<\/th>\n | Best For<\/th>\n<\/tr>\n<\/thead>\n | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 10 mm<\/td>\n | Slower, more controlled<\/td>\n | Beginners, ball-control focused players<\/td>\n<\/tr>\n | ||||||||||||||||||||||||||||||||||||
12 mm<\/strong><\/td>\n| Balanced<\/strong><\/td>\n | Most club and commercial courts \u2714<\/strong><\/td>\n<\/tr>\n | 15 mm<\/td>\n | Faster, more dynamic<\/td>\n | Intermediate to advanced players<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n | Fiber Thickness (Dtex): The Durability Factor Most Buyers Overlook<\/h2>\nDtex stands for decitex \u2014 a unit measuring the weight of yarn per 10,000 metres. The higher the Dtex value, the thicker and heavier the fiber. For padel, fiber thickness is one of the most consequential specifications because the sport places repeated, concentrated stress on a small court surface through lateral sliding movements and ball impact.<\/p>\n Fiber specifications for padel courts typically range from 8,000 to 10,000 Dtex. The higher the Dtex value, the thicker the fiber and the stronger its resistance to wear and foot traffic. High-Dtex fibers withstand frequent use and high-intensity competitive play far better than thinner alternatives.<\/p>\n Thin fibers \u2014 anything below 7,000 Dtex \u2014 flatten and fray quickly under the lateral sliding movements that define padel. A court receiving heavy daily use with low-Dtex turf may need full surface replacement within one to two years. Investing in higher-Dtex fiber from the start is significantly more economical over the life of the facility.<\/p>\n <\/p>\n \n Arturf recommendation:<\/strong> Our padel turf range runs from 9,000 Dtex to 13,500 Dtex \u2014 engineered for high-traffic facilities where surface longevity is non-negotiable.<\/p>\n<\/div>\n Not all curly yarns are equal. Two production methods dominate the padel turf market: ATY (Air Textured Yarn) and KDK (Knit De Knit). Understanding the difference could save you a full court replacement within five years.<\/p>\n KDK stands for Knit De Knit \u2014 a texturing technique that uses ring knitting and heat setting. The yarn is first knitted into a tube, steam treated to fix the crimps, then unknitted \u2014 leaving a yarn with stable, consistent loops throughout. It is made entirely from polyethylene (PE) and can be produced at high Dtex values, giving excellent ball rebound and a thick, elastic surface with no additional shock pads required.<\/p>\n ATY (Air Textured Yarn) is produced using air streams at low temperatures. It is cheaper to manufacture and widely used in entry-level and recreational padel surfaces. However, ATY yarn retains its shape for approximately three years maximum, after which fibers begin to lose their crimp and the surface gradually flattens.<\/p>\n <\/p>\n For any facility expecting regular daily play \u2014 a club, sports centre, or padel venue \u2014 KDK yarn is the correct specification. The higher upfront cost is offset by significantly longer surface life and more consistent playing characteristics year after year.<\/p>\n Density refers to the number of fiber tufts per square metre. High-density turf \u2014 around 50,000 to 55,000 stitches per m\u00b2 \u2014 provides better durability, enhanced playability, and a longer lifespan than lower-density alternatives.<\/p>\n Higher density delivers three measurable benefits on a padel court. First, it improves ball bounce consistency \u2014 the surface responds the same way regardless of where the ball lands. Second, it holds sand infill more evenly, keeping the court playing at specification for longer between maintenance cycles. Third, it resists flattening in high-traffic zones like the service areas and the central corridor behind the net, where most court wear occurs.<\/p>\n When evaluating turf density from a supplier, ask for stitches per square metre alongside the Dtex value. Both figures together tell you far more about real-world durability than either spec alone.<\/p>\n Artificial turf for padel is not complete without the correct sand infill. The sand must be kiln-dried, silica-based, free from organic matter, and graded to a consistent grain size of 0.2\u20130.5 mm. Quartz silica sand is the established standard.<\/p>\n The sand does several things simultaneously: it stabilises the turf fibers in an upright position, controls ball bounce height and rolling speed, cushions player landings, and allows the controlled sliding movements that are a fundamental part of padel technique.<\/p>\n <\/p>\n <\/p>\n Important:<\/strong> Never use construction sand or beach sand. Irregular grain shapes abrade fiber roots and accelerate surface degradation. Only kiln-dried quartz silica sand \u2014 clean, round-grain, and consistently graded \u2014 is appropriate for padel turf infill.<\/p>\n<\/div>\n Padel surfaces come in a variety of colours and, according to most governing body guidelines, courts should be single-tone rather than multi-colour. Blue is the dominant choice across professional and club venues worldwide, offering high contrast against the yellow ball and a clean, contemporary appearance that photographs and films well.<\/p>\n Green, terracotta, red, and custom colours are available from most manufacturers. Colour is largely an aesthetic and branding decision \u2014 it does not affect playing performance. If your courts will be used for competitive play or tournaments, confirm that your chosen colour meets the requirements of your governing body before ordering.<\/p>\n At Arturf, we offer padel turf in blue, green, red, and other colours on request. Custom colourways are available subject to minimum order quantities.<\/p>\n The standard pile height for padel courts is 10\u201312 mm, with 12 mm being the most widely used specification. Shorter pile (10 mm) produces a slightly slower, more controlled game, while longer pile (up to 15 mm) creates a faster surface. For most club and commercial facilities, 12 mm delivers the best balance of playability, durability, and maintenance requirements.<\/p>\n For padel courts expecting regular or heavy use, a minimum of 8,000 Dtex is recommended, with 9,000\u201313,500 Dtex being the range for professional and high-traffic facilities. Low-Dtex fibers \u2014 below 7,000 Dtex \u2014 wear out quickly under the lateral movements and repeated ball impact that characterise padel, and may need replacement within one to two years on a busy court.<\/p>\n KDK (Knit De Knit) yarn is produced through a ring-knitting and heat-setting process that creates more stable, resilient crimped fibers than standard ATY (air textured) yarn. KDK yarn retains its shape for six or more years, versus approximately three years for ATY. For padel courts with regular daily use, KDK yarn is the recommended specification \u2014 it delivers more consistent ball bounce and significantly longer surface life.<\/p>\n Kiln-dried quartz silica sand with a grain size of 0.2\u20130.5 mm is the correct infill for padel courts. The sand must be free of organic matter and consistently graded. Approximately 7\u20138 kg\/m\u00b2 is needed for KDK textured turf, and around 15 kg\/m\u00b2 for conventional fibrillated or monofilament surfaces. Construction sand and beach sand are not suitable \u2014 irregular grain shapes degrade the fiber roots over time.<\/p>\n A well-specified padel surface \u2014 8,000+ Dtex fibers, KDK yarn, high density, correct sand infill, and regular maintenance \u2014 can last 8 to 12 years under moderate to heavy use. Low-specification turf with thin fibers and poor infill management may need replacement within two to three years on a busy court.<\/p>\n No \u2014 colour is a purely aesthetic decision and has no effect on ball bounce, traction, or surface durability. Blue is the most common choice for its high contrast against the yellow ball. Green, red, and custom colours are available. Always confirm colour compliance with your governing body if competition use is planned.<\/p>\n Choosing padel turf is not a decision to make on price alone. The fiber thickness, yarn type, density, and infill system together determine how the court plays on day one \u2014 and how it continues to perform three, five, and ten years later. A surface that looks identical at installation can diverge dramatically in performance and longevity based on specifications that are invisible to the eye.<\/p>\n If you are specifying a padel court \u2014 for a club, a sports centre, an investment project, or a residential facility \u2014 Arturf’s team can advise on the right turf specification for your usage level, climate, and budget. Li\u00ean h\u1ec7 v\u1edbi ch\u00fang t\u00f4i<\/a> ho\u1eb7c l\u00e0 view our padel turf range<\/a> to get started.<\/p>","protected":false},"excerpt":{"rendered":" Choosing the wrong padel turf is an expensive mistake \u2014 premature fiber wear, inconsistent ball bounce, and a full surface replacement within two to three years. Choose correctly, and a well-specified padel surface will hold up under heavy daily use for eight to twelve years. This guide covers the six specifications that determine how a […]\n","protected":false},"author":3,"featured_media":85846,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_seopress_robots_primary_cat":"","_seopress_titles_title":"","_seopress_titles_desc":"","_seopress_robots_index":"","_seopress_analysis_target_kw":"","footnotes":""},"categories":[845],"tags":[],"class_list":["post-85837","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-padel-court"],"_links":{"self":[{"href":"https:\/\/arturf.com\/vi\/wp-json\/wp\/v2\/posts\/85837","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/arturf.com\/vi\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/arturf.com\/vi\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/arturf.com\/vi\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/arturf.com\/vi\/wp-json\/wp\/v2\/comments?post=85837"}],"version-history":[{"count":5,"href":"https:\/\/arturf.com\/vi\/wp-json\/wp\/v2\/posts\/85837\/revisions"}],"predecessor-version":[{"id":85845,"href":"https:\/\/arturf.com\/vi\/wp-json\/wp\/v2\/posts\/85837\/revisions\/85845"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/arturf.com\/vi\/wp-json\/wp\/v2\/media\/85846"}],"wp:attachment":[{"href":"https:\/\/arturf.com\/vi\/wp-json\/wp\/v2\/media?parent=85837"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/arturf.com\/vi\/wp-json\/wp\/v2\/categories?post=85837"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/arturf.com\/vi\/wp-json\/wp\/v2\/tags?post=85837"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}} |